{"product_id":"tilt-mount","title":"Tilt Mount - Adjustable Solar Panel Tilt Brackets for Roofs and Flat Surfaces","description":"\u003cp\u003eA flat-mounted panel is pointed at the sky rather than at the sun, and in winter the sun is low. These adjustable aluminium arms let you prop the back edge of a rigid panel up to a useful angle, which is where most of the gain from tilting comes from — short days, low sun, and a panel that would otherwise be looking at the wrong part of the sky.\u003c\/p\u003e\u003ch2\u003eWhich arm length\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15~30° | 14.2 inch arm\u003c\/strong\u003e — the shallower option. Suits a lower latitude, a year-round compromise angle, or a location where wind is a real concern and you want to keep the panel closer to the roof.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30~60° | 26.0 inch arm\u003c\/strong\u003e — the steep option. This is the one for a genuinely high winter latitude, or for shedding snow off the panel face. Sixty degrees is steep enough that snow will slide rather than sit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese are two different arm lengths, not two quality tiers. Pick the one whose range covers the angle you actually want, and note that the ranges do not overlap much — if you want 30 degrees, either will do it, at opposite ends of their travel.\u003c\/p\u003e\u003ch2\u003eWhat these will not do, plainly\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe angle you can reach depends on your panel's length.\u003c\/strong\u003e Rich Solar says only \"maximum tilt angles depending on the size of solar panels,\" which is true but unhelpful. A fixed-length arm pushing up the back edge of a long panel produces a shallower angle than the same arm on a short panel. If you are close to needing the top of a range, measure your panel first or ask us.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA tilted panel is a sail.\u003c\/strong\u003e This is the thing to take seriously. Flat on a roof, a panel presents almost nothing to the wind. At 60 degrees it presents its whole face, and the load goes into your roof fixings, not into the tilt arms. \u003cstrong\u003eRich Solar publishes no wind load rating for these mounts at all.\u003c\/strong\u003e Do not leave a panel tilted through a storm, and do not tilt on a substrate you would not trust with the load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for use while driving.\u003c\/strong\u003e If this is going on an RV or trailer, the panel must be lowered flat before the vehicle moves. That is true of every tilt mount and it is how most of them get destroyed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRich Solar does not state how many arms are in a pack.\u003c\/strong\u003e Neither the product page nor the collection listing says whether a purchase covers one panel or one side of one panel. We are not going to guess at a quantity. \u003cstrong\u003eAsk us to confirm before you order\u003c\/strong\u003e if the count matters to your build — this is a genuine gap in the manufacturer's published data.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo weight, no dimensions and no material grade are published\u003c\/strong\u003e beyond \"aluminum alloy\" and the adjustable length. There is an installation manual covering both variants; ask us for it if you need the hole pattern before committing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFramed rigid panels only.\u003c\/strong\u003e There is nothing to bolt a tilt arm to on a flexible panel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe tilt arms replace the rear fixing only. The front edge of the panel still needs a hinge point fixed down — plan both ends before you drill anything.\u003c\/li\u003e\n\u003cli\u003eEvery fixing point is a roof penetration. Bed on butyl or a compatible sealant and seal the fastener heads; no sealant is supplied.\u003c\/li\u003e\n\u003cli\u003eSet the angle with the panel supported, not hanging on the adjustment. Do not use the arm as a lever to lift the panel.\u003c\/li\u003e\n\u003cli\u003eIf you will change the angle seasonally, leave enough cable slack at both extremes of travel and check the cable is not chafing at either position.\u003c\/li\u003e\n\u003cli\u003eRe-check the fasteners after the first few weeks. Tilt mounts see cyclic wind load and bolts that were snug on day one often are not by month two.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCovered by Rich Solar's published limited warranty; terms are on the manufacturer's warranty page.\u003c\/li\u003e\n\u003cli\u003eCarries a California Proposition 65 warning for cancer risk and reproductive harm.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RICHSOLAR","offers":[{"title":"15~30° | 14.2\"","offer_id":46392693391510,"sku":"RS-TM4","price":43.99,"currency_code":"USD","in_stock":true},{"title":"30~60° | 26.0\"","offer_id":46520506974358,"sku":"RS-TM6","price":51.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/5291\/1254\/files\/RS-TM4AdjustableTiltMount20251118_1.jpg?v=1785962251","url":"https:\/\/sunenergydepot.com\/products\/tilt-mount","provider":"sunenergydepot.com","version":"1.0","type":"link"}