{"product_id":"all-in-one-energy-storage-system","title":"All-in-One Energy Storage System - 6500W Inverter with 5120Wh 48V Battery","description":"\u003cp\u003eEverything a small off-grid or backup system needs, already wired together in one floor-standing cabinet: a 6500W pure sine inverter, dual MPPT solar charge controllers good for 8000W of array, and a 5120Wh 51.2V lithium battery. Instead of sizing an inverter, a controller, a battery, a BMS and the cabling between them, you bolt this down and connect three things - PV, grid or generator, and your load panel.\u003c\/p\u003e\u003ch2\u003eWhy this system\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e6500W continuous pure sine output at 120 VAC, with up to 93% DC to AC conversion efficiency.\u003c\/li\u003e\n\u003cli\u003eTwo independent MPPT trackers accept up to 8000W of PV at 90 to 230 VDC operating range, 250 VDC maximum open circuit. String design still matters; check your array's cold-weather Voc against that 250V ceiling.\u003c\/li\u003e\n\u003cli\u003e5120Wh of LiFePO4 storage at 51.2V nominal, 100Ah, with an integrated BMS and breaker. Continuous discharge is 120A with a 192A one-minute peak.\u003c\/li\u003e\n\u003cli\u003eCombined AC and solar charging up to 120A, and you can set the charge current yourself rather than accepting a fixed rate.\u003c\/li\u003e\n\u003cli\u003eSupply priority is programmable between PV, battery and grid, so you decide whether the system is a self-consumption setup, a backup box, or something in between.\u003c\/li\u003e\n\u003cli\u003eBattery-independent design means the inverter will run from PV and grid even with the battery isolated for service.\u003c\/li\u003e\n\u003cli\u003eMonitoring over USB, RS232, SNMP, Modbus, GPRS and Wi-Fi, with Android and iOS apps for status and control.\u003c\/li\u003e\n\u003cli\u003eBattery capacity is expandable, so a system that starts at 5.1 kWh does not have to stay there.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe complete system stands 49.2 in tall in a 26 x 19.7 in footprint and weighs 287 lb assembled. Plan the delivery and the floor it sits on accordingly.\u003c\/li\u003e\n\u003cli\u003eShips by freight. A liftgate and a helper are not optional at this weight.\u003c\/li\u003e\n\u003cli\u003eWorks with utility power or a generator on the AC input, accepting 80 to 140 VAC.\u003c\/li\u003e\n\u003cli\u003eAC input current is up to 60A, so the feeding circuit and any transfer arrangement must be sized and permitted for it.\u003c\/li\u003e\n\u003cli\u003eThis is a 120V single-phase unit. It will not by itself serve a 240V split-phase panel.\u003c\/li\u003e\n\u003cli\u003eHave a licensed electrician handle the AC tie-in and grounding.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompliance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCertified to UL 1741 and CSA C22.2 No. 107.1-16 for the power conversion side.\u003c\/li\u003e\n\u003cli\u003eBattery compliance covers IEC 62619 and UN 38.3 for transport.\u003c\/li\u003e\n\u003cli\u003eElectromagnetic compatibility per EN 61000-6-1, EN 61000-6-3 and FCC Part 15B, plus UKCA marking.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rich Solar","offers":[{"title":"Default Title","offer_id":46391895818390,"sku":"RS-A10","price":5599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/5291\/1254\/files\/All-in-One-Energy-Storage-System-5.jpg?v=1785708913","url":"https:\/\/sunenergydepot.com\/products\/all-in-one-energy-storage-system","provider":"sunenergydepot.com","version":"1.0","type":"link"}